Your shopping cart is empty!
Stroud own brand
Brass backplate female M10 thread suitable for use with brass single rings.
Screwed rod available..
Connection butt weld, our fittings are all manufactured in line with BS1640 requirements and ANSI/..
Chrome plated brass backplate female thread suitable for use with chrome single rings.
..
Copper end feed 90 deg m/f street elbow
BS EN1254-1 WRAS approved
For use on hot & cold ..
Large brazing fitting range : This range is only a selection of what is available.
Size range..
Pioneer angle radiator valve, chrome plated body, wheelhead / lochshield top
..
Poly float to suit both part 1 & 2 brass ball float valves and plastic part 3 float valves
1/..
SES economy range of traps. This bottle trap has 1.1/4"connection c/w 76mm seal.
..
Bolt kit number 6 : Suitable for use with the following flanges.
Table 'F' : 1"
..
Stainless Steel screwed BSP fitting, grade 316, class 150
..
Our 90° and 45° bends are available in grades 304 & 316 stainless steel and are supplied as st..
3/4" White overflow waste - solvent weld
BS6700 / BS8558-2011
..
White push-fit waste socket plug conforming to BS5254
..
White Solvent weld waste access plug conforming to BS5255 EN1329
..
Pressure gauge, steel case, chrome bezel, 100mm round dial, bottom entry, 3/8" bsp connection
..
110mm Underground Soil 45 deg bend - Double socket EN1401-1
..
6" SES valve bolt pack No.15 to suit all Flanged valves
Pack consists of : 8 x M20x70 bzp set s..
Connection BSP male taper thread, mild steel to BS EN 10241
Lengths can vary (please check with s..
Commercial / Natural rubber, grade NO2, hardness 70' shore A, tensile MPa 4, elongation 300%&nb..
Brass backplate male M10 thread suitable for use with brass single rings.
..
M10 Metric set screw, mild steel with BZP finish.
Supplied as single unit.
..
Copper end feed 45 deg elbow
BS EN1254-1 WRAS approved
For use on hot & cold water syste..
Copper float to suit both part 1 & 2 brass ball float valves and plastic part 3 float valves
..
MDPE blue hinged pipe clip
Various sizes from 19mm to 35mm
..
Bolt kit number 7 : Suitable for use with the following flanges.
Table 'F' : 4"
PN16: 4"
..
Our 90° and 45° bends are available in grades 304 & 316 stainless steel and are supplied as ..
3/4" White overflow waste - solvent weld
BS6700 / BS8558-2011
..
White Solvent weld waste reducer conforming to BS5255 EN1329
..
Pressure gauge kit, plastic case, 100mm round dial, bottom entry, 3/8" bsp connection
The ki..
110mm Underground 90 deg bend - Double socket EN1401-1
..
110mm Black soil pipe fixing bracket
BS4514 EN1329-1
..
Connection BSP female parallel thread, mild steel to BS EN 10241
..
Commercial / natural rubber, grade NO2, hardness 70' shore A, tensile MPa 4, elongation 300%.
Tec..
SES Brass compression 90 deg x bsp male adaptor ,fig 402
..
M12 Metric set screw, mild steel with BZP finish.
Supplied as single unit.
..
Connection butt weld, our fittings are all manufactured in line with BS1640 requirements and ANSI/..
Copper end feed 45 deg street elbow
BS EN1254-1 WRAS approved
For use on hot & cold wate..
Galvanised malleable 45 deg elbow, connection female bsp
..
Compression connection, chrome plated finish, reduced bore, screwdriver slot operation.
..
Female thread connection, reduced bore, chrome plated brass body, thumb turn lever
..
Pioneer angle radiator valve,chrome plated body, wheelhead / lochshield top
Valve c/w Drain off
..
SES economy range of traps. This sink trap has 1.1/2"connection c/w 76mm seal.
..
Bolt kit number 8 : Suitable for use with the following flanges.
Table 'F' : 5"
..
Our range of tees is second to none; we offer from stock the standard equal tee with pulled or red..
Compression end connection, nickel plated brass body, TMV3 standard
Conforms to TMV2, TMV3 and WR..
3/4" White overflow waste - solvent weld
BS6700 / BS8558-2011
..
3/4" White overflow waste - solvent weld
BS6700 / BS8558-2011
..
White Solvent weld waste pipe clip conforming to BS5255 EN1329
..
Compound gauge kit, steel case, chrome bezel, 100mm round dial, bottom entry, 3/8" bsp con..
110mm Underground Soil 15 deg bend - Single socket
..
110mm Black soil pipe fixing bracket
BS4514 EN1329-1
..
6" x 4" Flexible soil coupling cast iron x plastic
..
Connection bsp male / female, 45 deg, black malleable iron
..
Black push-fit waste 90 deg knuckle bend conforming to BS5254
..
Commercial / natural rubber, grade NO2, hardness 70' shore A, tensile MPa 4, elongation 300%.
Tec..
SES Brass compression 90 deg x bsp female adaptor, fig 403
..
M16 Metric set screw, mild steel with BZP finish.
Supplied as single unit.
..
Galvanised malleable 45 deg elbow, connection male x female bsp
..
Bolt kit number 9 : Suitable for use with the following flanges.
TABLE 'F' : 6"
BS4504 PN16 : ..
Stainless Steel screwed BSP fitting, grade 316, class 150
..
Our range of cones includes concentric and eccentric and is offered from ½” up to 204mm.
All m..
Viva height adjustable syphon 7.1/2" to 9"
..
3/4" White overflow waste - solvent weld
BS6700 / BS8558-2011
..
110mm Underground Soil 30 deg bend - Single socket EN1401-1
..
110mm Black 87.5 deg tight radius bend, push-fit
BS4514-1 EN1329-1
..
Connection BSP female taper thread, mild steel to BS EN 10241
..
Black push-fit waste 45 bend conforming to BS5254
..
M16 Metric set screw, mild steel with BZP finish.
Supplied as single unit.
..
Copper end feed reducing tee (reducing on the branch only)
BS EN1254-1 WRAS approved
For use..
Bolt kit number 7 : Suitable for use with the following flanges.
Table 'F' : 8"
..
Our range of cones includes concentric and eccentric and is offered from ½” up to 204mm.
All man..
Black case, brass chrome finish bezel, 2" long stem / pocket
Range 0-120 deg c
..
110mm Underground 45 deg bend - Single socket EN1401-1
..
110mm Black 45 deg soil bend spiot tail, push-fit
BS4514 EN1329-1
..
© Copyright SES Pipeline 2024, All Rights Reserved